DuckDuckFedi i want to (ideally) buy or build a weather station.
-
@kunsi airgradient ticks almost all the boxes, without light level though: https://www.airgradient.com/outdoor/
@Jay16K Yeah, i saw that, though i would really like to have light level
(Maybe i can frickel that)
-
DuckDuckFedi i want to (ideally) buy or build a weather station.
Sensors i need:
- Temperature
- Humidity
- Pressure
- PM 2.5
- PM10
- light levelOptional:
- amount of rain
- CO2I also want wifi or zigbee connectivity. Must work without internet connection and with home assistant.
Is there anything available to purchase that has all i need? If not, what parts do i want to buy to build one?
@kunsi the ecowitt stuff is what I have and we also use it for EMF - genuinely good quality and decent value: https://www.ecowitt.com
There's a local Home Assistant integration for it, and there's also a MQTT bridge which is what I use: https://github.com/bachya/ecowitt2mqtt
-
@kunsi airgradient ticks almost all the boxes, without light level though: https://www.airgradient.com/outdoor/
@kunsi There is also ribbit Network Hardware that might be hackable / expandable as well: https://ribbit-network.github.io/ribbit-network-frog-hardware/
-
@kunsi the ecowitt stuff is what I have and we also use it for EMF - genuinely good quality and decent value: https://www.ecowitt.com
There's a local Home Assistant integration for it, and there's also a MQTT bridge which is what I use: https://github.com/bachya/ecowitt2mqtt
@kunsi @russss I run some ecowitt outdoor sensor and that's working well (I use the integration but will check the mqtt bridge - thanks for the hint!). So long haven't splurged on the full weather station, but have been tempted a few times.
Last September I created a gill shield for a cheap Aqara indoor environmental sensor (temperature, humidity, pressure via zigbee), and to my utmost surprise that is still running just fine too.
https://chaos.social/@foosel/115270728916797080 -
@kunsi @russss I run some ecowitt outdoor sensor and that's working well (I use the integration but will check the mqtt bridge - thanks for the hint!). So long haven't splurged on the full weather station, but have been tempted a few times.
Last September I created a gill shield for a cheap Aqara indoor environmental sensor (temperature, humidity, pressure via zigbee), and to my utmost surprise that is still running just fine too.
https://chaos.social/@foosel/115270728916797080@foosel @kunsi the MQTT bridge can emit Home Assistant compatible messages too, so you can use it to do HA and also other stuff.
(I wrote a converter for the MADIS/APRS network so my weather station is on windy.com: https://www.windy.com/station/madis-AV975?51.530,-0.073,11,p:temp)
-
DuckDuckFedi i want to (ideally) buy or build a weather station.
Sensors i need:
- Temperature
- Humidity
- Pressure
- PM 2.5
- PM10
- light levelOptional:
- amount of rain
- CO2I also want wifi or zigbee connectivity. Must work without internet connection and with home assistant.
Is there anything available to purchase that has all i need? If not, what parts do i want to buy to build one?
@kunsi esphome self build?
-
@kunsi the ecowitt stuff is what I have and we also use it for EMF - genuinely good quality and decent value: https://www.ecowitt.com
There's a local Home Assistant integration for it, and there's also a MQTT bridge which is what I use: https://github.com/bachya/ecowitt2mqtt
@russss These all seem to be battery powered, am i seeing that right?
-
@kunsi solar as well - batteries are only used at night and it's *very* efficient. Haven't changed the batteries in mine for nearly 4 years.
-
@kunsi solar as well - batteries are only used at night and it's *very* efficient. Haven't changed the batteries in mine for nearly 4 years.
@russss okay, thanks.
-
DuckDuckFedi i want to (ideally) buy or build a weather station.
Sensors i need:
- Temperature
- Humidity
- Pressure
- PM 2.5
- PM10
- light levelOptional:
- amount of rain
- CO2I also want wifi or zigbee connectivity. Must work without internet connection and with home assistant.
Is there anything available to purchase that has all i need? If not, what parts do i want to buy to build one?
@kunsi there are some guides here: https://sensor.community/en/sensors/ but you‘ll probably need to adjust a bit
-
DuckDuckFedi i want to (ideally) buy or build a weather station.
Sensors i need:
- Temperature
- Humidity
- Pressure
- PM 2.5
- PM10
- light levelOptional:
- amount of rain
- CO2I also want wifi or zigbee connectivity. Must work without internet connection and with home assistant.
Is there anything available to purchase that has all i need? If not, what parts do i want to buy to build one?
So far the options seem to be:
- Ecowitt $something (requires gateway)
- Airgradient Outdoor (no light level)
- DIYI will keep this post updated if i fine more options.
-
So far the options seem to be:
- Ecowitt $something (requires gateway)
- Airgradient Outdoor (no light level)
- DIYI will keep this post updated if i fine more options.
@kunsi If you are against vendor gateway devices, OpenMQTTGateway allegedly supported Ecowitt devices when I was last looking at doing this (their compatibility site seems down right now).
-
@kunsi If you are against vendor gateway devices, OpenMQTTGateway allegedly supported Ecowitt devices when I was last looking at doing this (their compatibility site seems down right now).
-
R ActivityRelay shared this topic
